Research Results List
2018
Dec. 26, 2018 Professor Tokito gave an invited talk at 第一回次世代放射光が拓くイノベーション 東北7大学次世代放射光学術シンポジウム.(Tohoku University, Miyagi) on December 26.
Dec. 19, 2018 Associate Professor Matsui gave an invited talk at The 28th Japan MRS Annual Meeting.(Kitakyushu International Conference Center, Fukuoka) on December 19.
Dec. 19, 2018 Associate Professor Nagamine gave an invited talk at The 28th Japan MRS Annual Meeting.(Kitakyushu International Conference Center, Fukuoka) on December 19.
Dec. 19, 2018 Professor Tokito gave a keynote lecture at The 28th Japan MRS Annual Meeting.(Kitakyushu International Conference Center, Fukuoka) on December 18.
Dec. 13, 2018 Associate Professor Matsui gave an invited talk at The 25th International Display Workshops (IDW).(Nagoya Congress Center, Aichi) on December 13.
Dec. 12, 2018 A paper related to Dr.Yoshida (Project Researcher), "Three-dimensional interconnect layers inkjet printed on plastic substrates using continuous-wave xenon light sintering" were published in the Jpn. J. Appl. Phys.
Dec. 12, 2018 Professor Tokito gave an invited talk at The Society of Polymer Science Japan, Chugoku-Shikoku Branch 44th Lecture meetings.(Facu lty of Engineering, Yamaguchi University) on December 12.
Dec. 10, 2018 M2 Student Mano's paper was highlighted as a Cover Picture in "ChemElectroChem, Volume 5, Issue 24(December 10, 2018)"
Dec. 05, 2018 A paper written by Project Researcher Yoshida titled "Three-dimensional interconnect layers inkjet printed on plastic substrates using continuous-wave xenon light sintering” was accepted by Jpn. J. Appl. Phys.
Dec. 03, 2018 An article related to Professor Tokito titled "New development of printed electronics" was published in "JPCA(Japan Electronics Packaging and Circuits Association) NEWS" December issue.
Dec. 03, 2018 A paper co-written by Assistant Professor Takeda titled "3D monolithic integration in flexible printed organic transistors" was accepted by Nature Communication.
Nov. 30, 2018 Professor Tokito gave an invited talk titled "Flexible and Printed Organic Electronics Development for IoT Sensor Applications" at the 2018 MRS Fall Meeting & Exhibit. (Hynes Convention Center, Boston) on November 28.
Nov. 16, 2018 Assistant Professor Sekine gave an Invited talk at 九州支部 九州エレクトロニクス実装学会(JIEP Kyusyu-branch Meeting) on November 16.
Oct. 29, 2018 Assistant Professor Sekine gave an invited talk at The 181st Committee on Multifunctional Molecular Electronics. (Faculty of Engineering, The University of Tokyo) on October 29-30.
Oct. 29, 2018 Associate Professor Matsui gave an invited talk at The 181st Committee on Multifunctional Molecular Electronics. (Faculty of Engineering, The University of Tokyo) on October 29-30.
Oct. 28, 2018 Professor Shiba gave an invited talk at Yonezawa kōgyō-kai Ibaraki branch general meeting. (Hotel Terrace the Square Hitachi, Ibaraki) on October 28.
Oct. 25, 2018 An article related to Assistant Professor Sekine was published in "機械設計(MACHINE DESIGN)" November issue (2018,Vol.62,No.12).
Oct. 24, 2018 Professor Tokito gave an invited talk at The 8th Flexible and printed Electronics Korea Symposium(2018FPEK).(Haeujndae Centum Hotel, Busan, Korea) on October 24.
Oct. 18, 2018 Assistant Professor Sekine gave an invited talk at The Japan Robot Week 2018 Seminar. (Tokyo Big Sight) on October 18.
Oct. 15, 2018 A paper related to Taisei Mano(M2 student), "Printed Organic Transistor-based Enzyme Sensor for Continuous Glucose Monitoring in Wearable Healthcare Applications" were published in the online edition of ChemElectroChem.